The Settings Menu

The Settings menu is where data acquisition tasks are specified:

1. Acquisition: Sample rate, sweep length and interval, trig source, etc.
2. Analog Input: Which channels to acquire, pre-processing, scaling
3. Classification of sweeps
4. Trigger: Trig source and level, refractory period, etc.
5. Event Timing: Timed trig of external events
6. Analog Output patterns (waveforms)
7. Devices: Hardware setup

During analysis the settings in use when data were acquired can be reviewed via this menu as well - leave dialogs via Cancel, otherwise Mr. Kick may switch from analysis to acquire mode.